damn bro, Derek got a baller *** pc.
I made a topic about this when the redesign of the site, it used to be at the top of the page and it made me really sad they got rid of it.
unless you're doing a really precise mod to your parts/case, you'll probably just need a screwdriver, preferably a magnetic one.
the royal set only comes in silver and gold I believe.
I second this. my case's power button didn't work so my PC wouldn't turn on even though everything else was working.
if you are building a whole new pc then I think this lest should be good enough. I'm not the best at these though.
as long as all the pins are being filled and your power supply is good enough then yes it will power it.
i completely forgot the k95 existed. thanks, this probably the keyboard im gonna get. are browns loud though? should I put o-rings on them
I've been listening to a lot of NF recently
I failed to realize that my case actually does have a second place another hdd, thanks for suggestions.
yeah, I forgot it has another one. Thanks.
if im not mistaken. both of those do the same thing. they are fan hubs with special controllers in them. they should do the same thing.
instead of optifine, I use a mod called vanillafix, it has some optifine qualities and makes my game go from 20fps to 100fps on my 2200g. it doesn't have the graphics setting that optifine does though.
updating bios shouldn't be too hard. just make sure you do with your 2600 before you put in a new cpu. also make sure there isn't supposed to be a power outage in your area while you update either.
i don't know much about how graphics cards with that many outputs work that well, but wont there be like a really big bottleneck with a 8700k?
you'll see an improvident in performance but it if you can afford it, I would suggest getting a 3600, and updating the bios on the new motherboard if its not supported yet.
you can upgrade to a 20 series gpu. a new 9000 cpu. more ram (kinda unnecessary though.) a better motherboard too, although you might not need a new motherboard. and a new cooler for cpu, if you're using stock cooler.
was the video cable plugged into your motherboard or GPU? If its in the motherboard then thats why its not working. plug video cord into the gpu.
just get a xbox or playstation controller and plug it into your computer. its up to you which one you want.
my brother has this case and I helped him build in it. it was fine in my opinion. comes with 3 really nice rgb fans. would definitely not use a non-modular psu with it unless you plan on removing the hard drive bay.
watch bitwits video on how to build a pc. its very indepth and runs through every step required.
i wouldnt say there obsolete until ssds are the price per gb that hard drives are.
good for a start on a list, I would suggest adding a 1tb hardrive for mass storage though.
ok. i was probably going to go for the spectrum anyhow because it has less of that "gamer look" because of the wrist rest.
have fun and good luck!
i do plan on upgrading past a 3rd gen ryzen eventually but would this motherboard work better for 3700x/3800x?
red dead 2 isn't on pc yet so having a really high refresh rate won't help with that game (since its only on console). I really hope it does comes out for pc though.
it can have 3 120mm fans on top or 2 140mm on top.
on the front it can 3 120mm fans or 2 140mm
on the rear it can 1 120mm or 1 140mm
you can use a fan splitter. there really cheap but some are pretty ugly.
if all your running right now is 1 gpu and you dont plan on running crossfire/sli you should be good adding the network card or the ssd.
this is what I would do If he doesn't want to get a motherboard or switch to ryzen.
its real. I really want one with the wireless charging mousepad but thats expensive lol.
i have this exact same feeling after finishing my build. I want any excuse to open my computer back and move stuff around. I got some fans so I'm gonna install those later. but like what Granddy said. if you have a good used computer market near where you live then I would flip them.
theres 2 fan headers on the motherboard but you can get more if you get a fan splitter
what mic arm do you have? i need to get one for my snowball.
I have the same case and I'm trying to install fans in the front of it. how did you take the front panel off?
fortnite is in the movie
the case comes with a fan that will fit into it
PCPartPicker Part List
now a 1050 probably isn't going to get high settings on every game you want to play, so that would be the first thing I would upgrade in this build. other than that everything else should work fine.
thats pretty good. the i5 4690k is still a pretty good cpu and should do fine. the gtx 750ti is old and not the fastest card but should work for minecraft and roblox. its a pretty good deal.
The ryzen 3 2200g is an APU so it has integrated graphics and those integrated graphics are very good. fast ram so you can have things open. the ASRock Deskmini comes with a motherboard, case, and powersupply. this should fit in a suitcase and also be able to play the games you want to play.
im not sure bout how to answer most of your questions but power buttons are very easy to buy.
newegg has a bunch of them
apparently its possible. I'm not sure how you'd do it but the youtube channel HardwareCanucks has 2 videos about it, so I would start there.
theres not that much of difference at this price range. the 2600x and the 1700 are both around the same price but I believe the 2600x will perform better in what you want to use it for.
yes it is a good setup for gaming.
PCPartPicker part list / Price breakdown by merchant
thanks for converting your budget to USD.
CPU: ryzen 2600x cheap and should render for videos pretty quick
GPU: 2060 good overall, will easly max lol and dota2
RAM: fast and 16gb is pretty much required nowadays
STORAGE: ssd for boot and essential programs, hard drive for mass storage. you could drop the hard drive for some price savings
CASE: i like cases with no side panels or RGB, can be switched out as long as it fits the motherboard
PSU: 650W 80+ bronze Fully modular. good for the price and will power all your components
thats a $1000 budget. should easily be able to game and video edit.