|€209.00||+FREE s/h||In stock||€209.00||Buy|
|€205.38||+€3.95 s/h||In stock||€209.33||Buy|
|€219.00||+€3.95 s/h||In stock||€222.95||Buy|
* PCPartPicker may receive compensation for purchases made at participating retailers linked on this site. This compensation does not affect what products or prices are displayed, or the order of prices listed. Learn more here.
Fatal1ty X470 Gaming-ITX/ac
- X470 Gaming-ITX/ac
Socket / CPU
Black / Silver
PCI-E x16 Slots
PCI-E x8 Slots
PCI-E x4 Slots
PCI-E x1 Slots
- 2280 M-key
- 2230 E-key
SATA 6 Gb/s
Depends on CPU
USB 2.0 Headers
USB 3.2 Gen 1 Headers
USB 3.2 Gen 2 Headers
USB 3.2 Gen 2x2 Headers
- 24 points
- 6 months ago
from completed build GEEEK A30 mITX Office Work/Productivity Build - No GPU
Overall good. But a lot of the pins were labeled to small or not at all. Placement of the HD Audio pins is in an annoying spot.
- 20 points
- 13 months ago
from completed build White Knight - SILENT AMD gaming/trading machine
I guess it's either this or ASUS ROG. Frankly speaking, ROG has a cool heatsink for the NVME, and seeing that I'm using only 1 NVME as my 2TB storage, I should have gone for that one. BUT I didn't like the large antenna that came with the ROG board (lack of table space, see) hence ASROCK it is. I hung Asrock's antenna on Display Port connector.
Be warned: the mail-in rebate is non-existent. Do not count on it. I tried looking for the form online after purchase, it was nowhere to be found. It seems this is a common issue with Asrock, so I would say don't count on it.
Does the board perform well? Yes it does! Just keep in mind the NVME slot is at the back; meaning it runs HOT at the back and the back usually does not have good ventilation - you'll need to keep your cables well managed.
- 15 points
- 12 months ago
from completed build Portable Power
The layout for my small build is perfect on this board. Everything fit in the tight space and was easy to map out wiring. WiFi included is working great.
- 15 points
- 8 months ago
from completed build Mission Control (AMD ITX)
Great suite of i/o and support for up to 32gb of ram. Probably the best power delivery out of any other x470 ITX board as well.
One minor complaint is that the tab to remove GPUs is directly under the ram slots, making it really tough to release while the rest of your PC is assembled. Solved easily enough by removing your ram first.
- 7 points
- 14 months ago
from completed build SFF Family Desktop
Has all the right features I wanted, and was BIOS ready for the 2400G. That being said, I had to RMA the first one for a dead HDMI port. The bios version on there had a lockup issue when I was trying to set it up. I found others had the same problem, and found a work-around. Once I had it set up, and then updated the bios to the latest, everything came together.
- 4 points
- 22 months ago
from completed build Barbara
Love the new muted black look. The M.2 slot placement worries me a bit. It's behind the motherboard right next to the DAN's non-conductive shield, which traps a lot of heat.
The antenna is an interesting design but I'm not sure where to attach them on the DAN. The obvious location is somewhere in the rear half of the case, but it gets pretty warm there under load. Can't go without antennas either because Bluetooth is terrible without it, even with devices less than two feet away.
- View Compatible CPU Coolers
- View Compatible CPUs
- View Compatible Cases
- View Compatible Memory
- View Compatible Optical Drives
- View Compatible Power Supplies
- View Compatible Sound Cards
- View Compatible Storage
- View Compatible Video Cards
- View Compatible Wired Network Adapters
- View Compatible Wireless Network Adapters
- AMD Ryzen 7 2700X (@4 GHz)
- GeForce GTX 1070
- AMD Ryzen 7 2700X
- AMD Ryzen 3 3200G