PCPartPicker
  • Log In
  • Register
Blog/

Fractal Design Meshify C Mini / X399 mATX Build

Recent Posts

October 2018

September 2018

March 2018

February 2018

December 2017

November 2017

October 2017

September 2017

August 2017

July 2017

June 2017

May 2017

April 2017

March 2017

February 2017

January 2017

December 2016

November 2016

October 2016

September 2016

August 2016

July 2016

June 2016

May 2016

April 2016

March 2016

February 2016

January 2016

November 2015

October 2015

September 2015

August 2015

July 2015

June 2015

May 2015

March 2015

February 2015

November 2014

October 2014

September 2014

August 2014

July 2014

June 2014

May 2014

April 2014

March 2014

February 2014

January 2014

December 2013

November 2013

October 2013

August 2013

July 2013

June 2013

May 2013

April 2013

March 2013

January 2013

December 2012

November 2012

October 2012

September 2012

August 2012

July 2012

April 2012

March 2012

Post

BoyScout March 30, 2018

With ASRock's X399M Taichi motherboard ready to take Ryzen Threadripper to smaller spaces, Ryan tries to squeeze as much power as he can into an Fractal's new Micro-ATX Meshify C Mini case. Check out our latest video to see how the build came together.

PCPartPicker part list: https://pcpartpicker.com/list/kZ2WD2

PCPartPicker part list / Price breakdown by merchant

Type Item Price
CPU AMD Threadripper 1950X 3.4GHz 16-Core Processor $869.99
CPU Cooler Enermax LiqTech TR4 240 102.2 CFM Liquid CPU Cooler $121.89
Motherboard ASRock X399M Taichi Micro ATX TR4 Motherboard $329.53
Memory Corsair Vengeance LPX 16GB (2 x 8GB) DDR4-3000 Memory $189.99
Memory Corsair Vengeance LPX 16GB (2 x 8GB) DDR4-3000 Memory $189.99
Storage ADATA XPG SX8000 512GB M.2-2280 Solid State Drive $214.99
Video Card EVGA GeForce GTX 1080 Ti 11GB FTW3 GAMING iCX Video Card $999.99
Case Fractal Design Meshify C Mini Dark TG MicroATX Mini Tower Case $89.99
Power Supply SeaSonic FOCUS Plus Gold 850W 80+ Gold Certified Fully-Modular ATX Power Supply $109.99
Case Fan Cooler Master MasterFan Pro 120 Air Balance RGB (3 pack) w/RGB Controller 42.7 CFM 120mm Fans $79.99
Other Mnpctech Single GTX 1080, 1080 Ti or 1070 GPU Support Bracket, Non-Reference, Black $49.99
Other CableMod PRO ModMesh Cable Extension Kit (Carbon) $49.99
Total at time of filming $3296.32 (USD)

Fractal Design Meshify C Mini Build

Of course, all those components in a small case leads to the challenge of making all the cables fit cleanly! So be sure to check out our cable management time lapse to see how Barry pulled it off.

Thanks to Fractal Design for providing the case, ASRock for the motherboard, Cooler Master for providing the case fans, Seasonic for providing the power supply and MNPCTech for providing the GPU support bracket used in this build.

Note: Benchmarks weren't ready in time to include here, but we'll update this post with a link to the Completed Build next week once they are done

Comments Sorted by:

Mnpctech MNPCTECH 4 Builds 30 points 11 months ago

I'm honored to see Mnpctech GPU support featured in a PCPP build, and look forward to working with PCPP again!

Permalink
Joshoa123 2 Builds 1 point 5 months ago

Hey I just wanted to say I love your gpu support. I'm just seeing it for the first time today and this is by accident. A few months ago I was looking hard for a decent quality gpu support and didnt happen to stumble across your product. Just a tip, maybe spend some more on marketing because this thing is an ingenious way to support the gpu. Thanks!

Permalink
Phildilf 3 Builds 2 points 5 months ago

PC modding is somewhat of a niche market. I understand it's a popular thing to do among most pc gamers, but to start up a company based solely on pc mods is niche. I'm sure it wouldn't be worth advertising when they can get their name out there through forums and featured builds like this one.

Also, I went to google and typed "gpu support". They were the 4th listing.

It is indeed one of the cleaner and more robust supports. I've been looking towards them for a future support for my RTX. It's HEAVY. Don't only look at them for support brackets, they have a ton of other stuff they dabble with :)

Permalink
AnonymouslyQuacked 3 points 10 months ago

When is next blog post?

Permalink
BoyScout staff submitter 21 Builds 2 points 10 months ago

Soon-ish.

Permalink
eopest 9 Builds 1 point 8 months ago

You guys give up on the blog updates? GPU prices have dropped somewhat since March... I was looking forward to a new build (or the benchmarks for this one)...

Permalink
[comment deleted by staff]
AnonymouslyQuacked 1 point 7 months ago

Yes please. How long will it be.

Permalink
AnonymouslyQuacked 2 points 7 months ago

They could be waiting for the Nvidia 11 series to release. ¯_(ツ)_/¯

Permalink
AnonymouslyQuacked 1 point 6 months ago

*20 series

Permalink
Continue this thread
[comment deleted by staff]
pegotico 2 Builds 2 points 11 months ago

Nice build!! Asrock always innovating.. Now its a micro ATX TR4 motherboard.

Permalink
Roboticman0421 1 point 11 months ago

Noice looking build

Permalink
Arden_Computers 1 Build 1 point 11 months ago

Just a stunning little build.

Permalink
Wolklung 1 point 11 months ago

Wow. Superb build.

& that GPU support looks great. Love it.

Permalink
ReverseFlash 1 point 11 months ago

WHOO I love the thread ripper builds!

Permalink
KevinMoondust 11 Builds 1 point 11 months ago

Now all we need ASRock to release is a Mini-ITX TR4 motherboard. I know those crazy wackos can come up with such crazy proposition.

The Meshify C is not my cup of tea, but I like how the end build looked like. Stubby, inoffensive... But packs quite a punch.

Permalink
bewo83 3 Builds 1 point 11 months ago

Nice Build! I have a bias, since I have a very similar build with the same motherboard and case with 2 x 1070 TIs. I recently changed the AIO to the Enermax 280 cooler and had problems connecting the block to the CPU/OPT header and the radiator fans to the Main CPU fan header. The logo did not light up and I thought it was a bad pump at first, but after some experimenting, it seemed the pump was not receiving enough power. Swapping the pump to the main CPU fan header and the radiator fans to the CPU OPT header resolved my issue.

Permalink
eeptman 1 point 7 months ago

Hi, bewo83

I am curious about how you insert 2 GPU cards on X399M. Is it possible to use the 1st and 2nd PCI-E slots together? Do you have any pics for that? Thanks.

Permalink
bewo83 3 Builds 1 point 7 months ago

You can use the first and second PCI-E slots but you won’t get the gap between the cards which allows air to flow and helps with cooling the top card. I picked the meshify C mini specifically due to the 5 slots, to allow for a gap. If you have a 4 slot case, and the cards sit on top of one another, I would suggest a blower style card where the hot air is blown out of the back rather than the double/triple fan cards

Permalink
eeptman 1 point 6 months ago

Yes. Thanks for the tips.

I got my x399m board and dual cards. So far so good. I choose shorter cards.

There is still a small gap between two cards anyway. I think that still help cooling inside the case.

Permalink
beardedmisfit 4 Builds 1 point 11 months ago

Great build. I loved the walk through. Did you only put in the M.2? No SSD's? May I ask why?

Permalink
qberryjam 1 point 10 months ago

The Adata XPG SX8000 is a SSD , Reads as such on the list, even mentions it in the build at 2:00 ....lol

Permalink
Gooberdad 10 Builds 1 point 11 months ago

Very nice. What a powerhouse.

Permalink
EliteGamer24 1 point 11 months ago

Great PC but $3,000. Not in my budget. Also Im an Intel Guy.

Permalink
Ichi_Oni 1 point 9 months ago

Threadripper is honestly better than the i9s. People who invest in i9s or Threadrippers are not those who are looking to game primarily (even though you could) and worried about single core, these chips are undoubtedly indented for highend workstation use.

PC World had a good write up about it: https://www.pcworld.com/article/3198476/computers/amd-threadripper-vs-intel-core-i9-the-best-cpu-for-enthusiasts.html

Permalink
EliteGamer24 1 point 8 months ago

okay I see. Thank you for your response!

Permalink
MasterfulJoe101 1 point 11 months ago

That thing looks real damn fine.

Permalink
kangpd 1 point 11 months ago

awesome

Permalink
jeremyga 1 Build 1 point 10 months ago

Great build but damn, you overspent like a Mofo. Don't you know that the 3 RAM companies are being sued again for price fixing......

Permalink
JCMsergox 4 Builds 1 point 10 months ago

Beautiful. I love the case, I hope that there will eventually be an ITX version available.

Permalink
Wewex007 1 point 8 months ago

this build is soooo beautiful and clean!

Permalink
ben94522 2 Builds 1 point 8 months ago

Hey, nice build. have you tested top vs front mounted radiators with this case?

Permalink
0verfiend 1 point 7 months ago

I think they need to put the 240 rad in front as intake. Exhaust out the top.

Permalink
TableTerrorMatt 1 Build 1 point 8 months ago

Nice build!

Permalink
0verfiend 1 point 7 months ago

Are there comparable GPU bracket for less than 49.99? Seems like a lot.

Permalink
SilvaRaven 1 point 7 months ago

$49.99 for a GPU support bracket? Seems a "little" high considering you can get quality CPU coolers for less than that. Guess I will take my chance with Home Depot or Lowe's.

Other than that, great build nonetheless.

Permalink
kershaw8706 1 point 7 months ago

You literally built my dream PC.

Ive had a list with the exact same parts, except for the 1080 for about a week now. It was really nice to see it other than in my mind. Im expecting to have enough to build my "tesseract" theme rig by the end of next year, if everything goes right.

Thanks for this.

Permalink
Lobsterareawesome 8 Builds 1 point 7 months ago

Hi guys! when are we gona see the next build from you guys? :D

Permalink
SilverKnights2 1 point 6 months ago

Not on topic, but how does the inventory system work? Thanks ;)

Permalink
keeper777 7 Builds 1 point 6 months ago

I see the RGB fan controller that came with the fans, do you know a good standalone control box that would be able to control multiple types of LEDs that vary between 5 and 12 volts?

Permalink
AnonymouslyQuacked 1 point 6 months ago

Now that the new Video Cards are out, possibly another blog post?

Permalink
BoyScout staff submitter 21 Builds 1 point 6 months ago
Permalink
blackburdtx 1 point 6 months ago

Hard to imagine that you could pack that many $$$ Dollar Signs $$$ in such a small box

Permalink
z1CHSR 1 point 5 months ago

how is that enermax cooler holding up?

Permalink
BoyScout staff submitter 21 Builds 1 point 5 months ago

It's actually been in daily use since shortly after we built it and it's been running smoothly.

Permalink
malek.badreddine 1 point 4 months ago

Hi, great build!!! I'm looking for similar build for work and research basically AI&ML stuff. I ve a few questions hope to find someone answers:

  • TR support for linux os (Ubuntu 16.04+)

  • mother board linux support wifi driver

  • minimum psu for dual 1080 ti

Permalink
TroyH 1 Build 1 point 21 days ago

Dual 1080ti in M-ATX?? I like your ambition =D

Permalink
singhgagan 1 point 4 months ago

Never liked this case, buy you guys have turned me into a fan. Looking at the size of this v/s mini-itx cases, I may actually use this case for the next build.

Permalink
Ethan3952018 1 point 3 months ago

Great Build

Permalink
Zeela 1 point 1 month ago

The GPU support is great, but how is it so expensive for a piece of metal? Even given that it is quite a niche and specific product.

Permalink
TroyH 1 Build 1 point 21 days ago

Very nice m-atx case. Would like to see some benchmarks relating to its temperature readings. Great work!

Permalink
cwells 1 point 9 days ago

Maybe get some Corsair ML fans or Noctuas rather than basic Cooler Masters (at least next level CM)

Permalink
[comment deleted]
[comment deleted]
[comment deleted by staff]
[comment deleted by staff]
[comment deleted by staff]
[comment deleted by staff]
[comment deleted by staff]
[comment deleted by staff]
0verfiend 1 point 7 months ago

Yes.

Permalink
[comment deleted by staff]
[comment deleted by staff]
[comment deleted by staff]